Act Quickly! Delaying may cause the spill to become a permanent stain. Blot liquids with a dry, white absorbent cloth or white paper towels. Gently scrape up semi-solids with a rounded spoon. Break up solids and vacuum.

  1. Pretest any spot removal solution (for color transfer to the cloth or damage to the carpet) in an inconspicuous area. If a change occurs, select another solution.
  2. Apply a small amount of the solution to a white cloth, and work in gently – do not rub — working from the edges of the spill to the center to prevent spreading. Allow to remain on the spill a few minutes. Be patient. Blot.
  3. Continue to use the first agent as long as there is a transfer of the spill to the cloth. Be patient. Complete removal may require repeating the same step several times. Or, you may need to move to the next solution.
  4. When the spill is completely removed, rinse the area with cold water; blot with a dry cloth until all moisture is removed.

A dry, absorbent, cleaning compound may be used as a substitute to minimize drying time.

Detergent Solution – Mix one fourth (1/4) teaspoon of a liquid dishwashing detergent per one (1) cup of lukewarm water. NEVER USE A STRONGER CONCENTRATION! Thorough rinsing is necessary to remove detergent residues that may cause rapid soiling. It may be necessary to rinse with warm water several times to completely remove residues. (See Residue Precautions.) Care should be used in selecting a detergent. Never use a laundry detergent of any type, because laundry detergents may contain optical brighteners (flourescent dyes) that dye the fiber. Do not select an automatic dishwashing detergent because many contain bleaching agents that destroy dyes and some fibers.

Warm Water – In most cases, use lukewarm tap water to rinse the cleaning solutions from the fiber. Not rinsing the solutions completely from the fiber can cause accelerated soiling.

Call a ProfessionalSOFLO Clean has the ability and the equipment to use more aggressive cleaning solutions to remove stubborn spills.

Residue Precautions

Many spot removal solutions can leave residues in the carpet that may attract soil. Rinse the area thoroughly several times with lukewarm tap water. We recommend using a mist type sprayer to prevent overwetting. After each rinse, blot the area with paper towels and pat it dry. You may need to rinse several times to remove all residues thoroughly. Always use the solutions in concentrations no stronger than recommended.

Important – ALWAYS read and follow the care instructions and any warnings provided by the carpet or upholstery manufacturer. Carpeting and upholstery with natural fibers and/or certain dyes or finishes may require special treatment. If in doubt contact SOFLO Clean for advice/service first. NEVER PROCEED with any stain removal instructions without knowing the exact nature of the stain involved. NEVER USE any retail products to remove stains from carpet or upholstery without seeking the advice of the manufacturer or you could void your warranty.